Targeted air circulation for healthier plant growth

The AC Infinity CloudRay Clip Fan is designed to improve internal airflow circulation within grow tents and indoor grow rooms. Available in S6 and S9 models, it delivers controlled oscillating airflow that helps stabilise environmental conditions while supporting healthier and stronger plant development.

Many growers focus primarily on extraction systems and carbon filtration while underestimating the importance of internal air movement. Without proper circulation inside the grow space, stagnant air pockets can develop around plants and beneath the canopy. This can lead to uneven temperatures, excess moisture build-up, weaker stems, poor transpiration, and increased risk of mould or pests.

The CloudRay helps solve these issues by creating consistent airflow movement throughout the grow environment.

Improve airflow balance and reduce stagnant air

Effective air circulation plays an essential role in maintaining a stable grow room climate. By continuously moving air throughout the canopy, the CloudRay helps:

• Reduce humidity pockets
• Improve airflow distribution
• Strengthen plant structure
• Support healthier transpiration
• Maintain more even temperatures

This movement also helps plants develop stronger stems by simulating natural airflow conditions, preparing them to better support heavier growth during later stages of cultivation.

The oscillating airflow pattern prevents air from constantly blowing in one direction, helping avoid excessive wind stress while improving overall environmental consistency.

Quiet EC motor with intelligent airflow control

The CloudRay uses an energy-efficient EC motor designed for quiet operation and smooth airflow control. This makes it ideal for indoor grow environments where low noise levels and energy efficiency are important.

Multiple speed settings allow growers to fine-tune airflow intensity depending on plant stage and grow room conditions. Lower airflow levels can be used for propagation and early growth, while higher circulation speeds help manage humidity and airflow within dense flowering canopies.

The fan’s targeted airflow design improves circulation without creating excessive turbulence inside the grow tent.

Smart integration within the UIS ecosystem

As part of the AC Infinity UIS ecosystem, the CloudRay can integrate with compatible AC Infinity controllers and the AC Infinity app for advanced environmental automation.

Growers can:

• Adjust fan speeds remotely
• Create airflow schedules
• Automate circulation based on environmental conditions
• Integrate airflow control with other UIS devices

This allows the CloudRay to work as part of a fully connected grow room system alongside inline fans, humidifiers, heaters, and environmental controllers.

By coordinating airflow with the wider climate system, growers can maintain more balanced environmental conditions throughout the grow cycle.

Designed specifically for grow tents and indoor cultivation

The CloudRay is engineered specifically for grow tent environments, with a secure clip mounting system that attaches easily to tent poles and framework.

Its compact design allows airflow to be positioned precisely where needed without occupying unnecessary canopy space. This makes it suitable for:

• Grow tents
• Indoor grow rooms
• Propagation spaces
• Hobby and advanced cultivation setups

The S6 and S9 models provide growers with flexibility depending on grow space size and airflow requirements.

Maintain healthier environmental conditions

Consistent airflow is critical for preventing hidden environmental problems that can quietly impact plant health over time. By improving circulation throughout the grow space, the CloudRay helps maintain more stable temperatures, humidity levels, and transpiration conditions.

This contributes to:

• Reduced environmental stress
• Improved nutrient uptake
• Lower mould and mildew risk
• Stronger plant structure
• More consistent plant growth

Key benefits

• Smart oscillating clip fan for grow tents and grow rooms
• Available in S6 and S9 models
• Improves internal air circulation and airflow balance
• Helps reduce stagnant air and humidity pockets
• Supports stronger stems and healthier transpiration
• Quiet and energy-efficient EC motor
• Adjustable oscillation and multiple speed settings
• Compatible with the AC Infinity UIS ecosystem
• App control and environmental automation compatibility
• Designed specifically for indoor cultivation environments

Important information

• Compatible with AC Infinity UIS ecosystem controllers and devices
• App connectivity available through compatible UIS integration
• Not compatible with G.A.S controllers

The post AC Infinity CloudRay – Clip Fan 9″ s9 appeared first on Kitbag Shop.

Here at Kitbagshop we just love this fan kit, it works, its simple and most of all its cost effective for the hobby grower.

The kit compromising of a Garden HighPro TT Fan and a Standard Line Carbon Filter, work simultaneously to ensure an effective removal of odours and an optimum airflow for maintains air circulation and heat extraction. Also included 5 Meters of standard ducting and 3 stainless steel clamps

So if its for your grow tent or secret cupboard this is the one for you, it does the job it clears the heat and smell when needed.

The post 8″ Hobby Fan And Carbon Filter Kit 200mm appeared first on Kitbag Shop.

Designed for the job in hand and designed to last

The Can-Fan RK 100 plastic tube fan is a backward centrifugal extractor using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control (controller required, not included) and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise.

For efficient performance with the best possible results use with Can Filters.

• Material: Plastic
• Weight: 1.5 kg
• Duct Diameter: 100 mm
• Capacity: 240 m3/h
• Current: 0.5 A
• Power: 60 W
• Speed controller allowed: Yes

NOTE: Electrical Installation Required UK wire and Plug

The post CanFan 4″ Extractor Fan 240m3h Airflow 100mm appeared first on Kitbag Shop.

Designed for the job in hand and designed to last

The Can-Fan RK 125 plastic tube fan is a backward centrifugal extractor using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control (controller required, not included) and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise.

For efficient performance with the best possible results use with Can Filters.

• Material: Plastic
• Weight: 1.5 kg
• Duct Diameter: 125 mm
• Capacity: 310 m3/h
• Current: 0.5 A
• Power: 60 W
• Speed controller allowed: Yes

NOTE: Electrical Installation Required UK wire and Plug

The post CanFan 5″ Extractor Fan 310m3h Airflow 125mm appeared first on Kitbag Shop.

Designed for the job in hand and designed to last

The Can-Fan RK 150 plastic tube fan is a backward centrifugal extractor using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control (controller required, not included) and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise.

For efficient performance with the best possible results use with Can Filters.

• Material: Plastic
• Weight: 2.5 kg
• Duct Diameter: 150 mm
• Capacity: 470 m3/h
• Current: 0.5 A
• Power: 70 W
• Speed controller allowed: Yes

NOTE: Electrical Installation Required UK wire and Plug

The post CanFan 6″ Extractor Fan 470m3h Airflow 150mm appeared first on Kitbag Shop.

Designed for the job in hand and designed to last

The Can-Fan RK 200 plastic tube fan is a backward centrifugal extractor using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control (controller required, not included) and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise.

For efficient performance with the best possible results use with Can Filters.

• Material: Plastic
• Weight: 3.1 kg
• Duct Diameter: 200 mm
• Capacity: 820 m3/h
• Current: 0.5 A
• Power: 100 W
• Speed controller allowed: Yes

NOTE: Electrical Installation Required UK wire and Plug

The post CanFan 8″ Extractor Fan 820m3h Airflow 200mm appeared first on Kitbag Shop.

Designed for the job in hand and designed to last

The Can-Fan RK 250 plastic tube fan is a backward centrifugal extractor using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control (controller required, not included) and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise.

For efficient performance with the best possible results use with Can Filters.

• Material: Plastic
• Weight: 3.1 kg
• Duct Diameter: 250 mm
• Capacity: 830 m3/h
• Current: 0.5 A
• Power: 100 W
• Speed controller allowed: Yes

NOTE: Electrical Installation Required UK wire and Plug

The post CanFan 10″ Extractor Fan 830m3h Airflow 250mm appeared first on Kitbag Shop.

Here at Kitbagshop we just love this fan kit, it works, its simple and most of all its cost effective for the hobby grower.

The kit compromising of a Garden HighPro TT Fan and a Standard Line Carbon Filter, work simultaneously to ensure an effective removal of odours and an optimum airflow for maintains air circulation and heat extraction. Also included 5 Meters of standard ducting and 3 stainless steel clamps

So if its for your grow tent or secret cupboard this is the one for you, it does the job it clears the heat and smell when needed.

The post 4″ Hobby Fan And Carbon Filter Kit 100mm appeared first on Kitbag Shop.

Here at Kitbagshop we just love this fan kit, it works, its simple and most of all its cost effective for the hobby grower.

The kit compromising of a Garden HighPro TT Fan and a Standard Line Carbon Filter, work simultaneously to ensure an effective removal of odours and an optimum airflow for maintains air circulation and heat extraction. Also included 5 Meters of standard ducting and 3 stainless steel clamps

So if its for your grow tent or secret cupboard this is the one for you, it does the job it clears the heat and smell when needed.

The post 6″ Hobby Fan And Carbon Filter Kit 150mm appeared first on Kitbag Shop.

Here at Kitbagshop we just love this fan kit, it works, its simple and most of all its cost effective for the hobby grower.

The kit compromising of a Garden HighPro TT Fan and a Standard Line Carbon Filter, work simultaneously to ensure an effective removal of odours and an optimum airflow for maintains air circulation and heat extraction. Also included 5 Meters of standard ducting and 3 stainless steel clamps

So if its for your grow tent or secret cupboard this is the one for you, it does the job it clears the heat and smell when needed.

The post 5″ Hobby Fan And Carbon Filter Kit 125mm appeared first on Kitbag Shop.