Roll size 15 meters

Excellent quality for multipurpose use great for using in ponds, hydroponics systems, and general plumbing etc.

Our PVC rubber pipe is highly flexible strong, and is used in almost all hydroponic irrigation systems for the water supply.
Designed and used in intelligent watering systems by (IWS) can also be used in your own DIY systems or adding to your current set up.

The post IWS PRO Pipe 15m Roll 25mm appeared first on Kitbag Shop.

Roll size 15 meters

Excellent quality for multipurpose use great for using in ponds, hydroponics systems, and general plumbing etc.

Our PVC rubber pipe is highly flexible strong, and is used in almost all hydroponic irrigation systems for the water supply.
Designed and used in intelligent watering systems by (IWS) can also be used in your own DIY systems or adding to your current set up.

The post IWS Standard Pipe 15m Roll 13mm appeared first on Kitbag Shop.

Consistent, precise feeding

This sale is for the 24 Pot PRO system with Large Trays and 25mm Pipe = its the most popular

With this kind or system you will have maximum control over feeding giving you an amazing yield with very little work each week.

An introduction

The IWS Dripper System is the ultimate growing system if you’re wanting to fine tune every element of the grow. From the amount of nutrient each plant receives to monitoring the pH and EC of run-off, IWS Dripper is for growers who want to be hands on but automate feeding.

The IWS Dripper System utilises the 4 litre per hour pressure compensated drippers or the blue flood drippers. This provides controllable, finely tuned feeding to the plants roots zone.

How does it work?

Nutrient is pumped from the FlexiTank down the dripper pipe to manifolds where the dripper lines are connected. It then runs directly to your plants, providing nutrient directly to the plant root zone. The 25mm dripper pipe is reduced to 3.2mm drippers where It pressurises, giving equal amounts of nutrient solution to each plant.

IWS Dripper is compatible with any pot type. These are placed on top of the stands which gather run-off. The Control Unit then collects and holds the run-off until it reaches the bottom float in the Control Unit, and it’s pumped to waste.

Why use Dripper?

Water efficiency

Dripper Systems deliver nutrient solution directly to the root zone, minimising water wastage through evaporation or run-off.

Precision

Dripper Systems give precise control over the amount of nutrient solution to each plant. This ensures plants receive the optimal amount of nutrient and reduces the risk of over or under watering. Additionally, Dripper Systems allow monitoring of both the nutrient and the run-off so you can maximise nutrient uptake.

Automated operation

The IWS Dripper System can be easily automated with the addition of a timer, allowing for consistent and regular watering schedules.

Uniform distribution

Dripper Systems provide uniform nutrient distribution across the entire growing area. Each plant receives an equal and consistent amount of nutrient, promoting uniform growth and reducing the risk of uneven crop development.

Reduced root diseases

By delivering nutrient solution directly to the root zone and avoiding over saturation, Dripper Systems help reduce the risk of root diseases caused by prolonged media saturation.

Scalability

Dripper Systems are scalable and can be adapted to suit the size of the grow room.

About this system

If you require a larger volume of run-off to be pumped from your plants or you’re using over 24 pots, IWS Dripper Pro is the ideal Dripper System for you.

With 25mm fittings, this system provides faster draining than the IWS Dripper Standard.

Why choose this one?

• Ensures even distribution of nutrient solution
• Ability to monitor nutrient and run-off
• Prevents water logging of root zone
• Available with either small or large stands
• Faster draining than the Dripper Standard

All kits contain:

• Control Unit – 3000L
• 25mm Fittings & Pipe
• Large Stands
• Dripper Line & Manifold
• Filter
• 250L FlexiTank
• Flood Drippers
• Pressure Drippers

24x Large Stand: Up to 45L pots

PLEASE NOTE : Cloth Pots are sold separately.

Mail order delivery will take approximately 4/5 days

Stocks are available in store but are limited can be ordered in within 24hrs

The post IWS Dripper System = Pro With Large Stands 24 Pot appeared first on Kitbag Shop.

24 Pot Run to Waste set up Auto drain Large Stands

HEALTHY, HIGH-YIELD HAND WATERING

Ideal for optimising at home growing.

AN INTRODUCTION

Autodrain is the perfect system if you like to hand water but want to move away from plants been sat in water, and you’re looking to invest in your first system. When using the Autodrain System you can easily pump your run-off to waste. By not leaving your plants sat in nutrient, it forces your roots to search for water. This in turn rapidly increases your root zone. In addition, the nutrient can be checked for EC and pH to fine tune your feeding.

The flexibility of this modular system means the Control Unit can gather run-off from as many plants as required, which can then run to waste. This method also provides the opportunity to monitor the pH and EC of your run-off, and ensure plants are receiving the optimum amount of nutrient.

HOW DOES IT WORK?

Autodrain removes run-off fast which prevents root rot, increases nutrient uptake and growth, and reduces the risk of crop-destroying issues like Pythium.

The Autodrain Control Unit collects the run-off. When the run-off reaches the lower float in the Control Unit, the solution is pumped to waste.

WHY USE AUTODRAIN?

PREVENTS OVER WATERING

Over watering can lead to root diseases and reduced oxygen availability for the root zone. Autodrain Systems prevent over watering by automatically draining excess water from the growing medium.

MONITORING EFFICIENT NUTRIENT DELIVERY

Autodrain Systems allow users to monitor the amount of run-off and the EC and pH levels to ensure optimal nutrient update.

OXYGENATION OF ROOTS

Autodrain Systems help oxygenate the root zone. Draining away excess water creates air pockets around the roots, preventing suffocation and promoting healthy root development.

TIME SAVING

Automating the drainage process reduces the need for manual intervention, saving time and labour for growers. This is particularly important in larger indoor growing operations where managing each plant individually is impractical.

CONSISTENCY

Autodrain Systems help ensure consistent growing conditions for all plants.

SCALABILITY

Autodrain Systems can easily be scaled to accommodate different size growing operations.

ABOUT THIS SYSTEM

The IWS Autodrain Standard is ideal for growers with under 8 pots, looking to add some automation to their grow room. Autodrain Standard comes with 16mm pipe and fittings.

WHY CHOOSE THIS ONE?

• Ability to monitor the EC and pH of run-off
• Prevents water logging of root zone
• Automated hand watering
• Available with either small or large stands

ALL KITS CONTAIN:

• Control Unit – 1000L
• 16mm Fittings & Pipe
• 24x Large Stands
• Please Note Pots not included

STAND:

• Large Stand: From 16L up to 45L pots

Mail Order Delivery will take approximately 4/5 days

Stock available in store but maybe ordered in with in 24hrs due to demand

The post 24 Pot Run to Waste set up Auto drain Large Stands appeared first on Kitbag Shop.

12 Pot Run to Waste set up Auto drain Large Stands

HEALTHY, HIGH-YIELD HAND WATERING

Ideal for optimising at home growing.

AN INTRODUCTION

Autodrain is the perfect system if you like to hand water but want to move away from plants been sat in water, and you’re looking to invest in your first system. When using the Autodrain System you can easily pump your run-off to waste. By not leaving your plants sat in nutrient, it forces your roots to search for water. This in turn rapidly increases your root zone. In addition, the nutrient can be checked for EC and pH to fine tune your feeding.

The flexibility of this modular system means the Control Unit can gather run-off from as many plants as required, which can then run to waste. This method also provides the opportunity to monitor the pH and EC of your run-off, and ensure plants are receiving the optimum amount of nutrient.

HOW DOES IT WORK?

Autodrain removes run-off fast which prevents root rot, increases nutrient uptake and growth, and reduces the risk of crop-destroying issues like Pythium.

The Autodrain Control Unit collects the run-off. When the run-off reaches the lower float in the Control Unit, the solution is pumped to waste.

WHY USE AUTODRAIN?

PREVENTS OVER WATERING

Over watering can lead to root diseases and reduced oxygen availability for the root zone. Autodrain Systems prevent over watering by automatically draining excess water from the growing medium.

MONITORING EFFICIENT NUTRIENT DELIVERY

Autodrain Systems allow users to monitor the amount of run-off and the EC and pH levels to ensure optimal nutrient update.

OXYGENATION OF ROOTS

Autodrain Systems help oxygenate the root zone. Draining away excess water creates air pockets around the roots, preventing suffocation and promoting healthy root development.

TIME SAVING

Automating the drainage process reduces the need for manual intervention, saving time and labour for growers. This is particularly important in larger indoor growing operations where managing each plant individually is impractical.

CONSISTENCY

Autodrain Systems help ensure consistent growing conditions for all plants.

SCALABILITY

Autodrain Systems can easily be scaled to accommodate different size growing operations.

ABOUT THIS SYSTEM

The IWS Autodrain Standard is ideal for growers with under 8 pots, looking to add some automation to their grow room. Autodrain Standard comes with 16mm pipe and fittings.

WHY CHOOSE THIS ONE?

• Ability to monitor the EC and pH of run-off
• Prevents water logging of root zone
• Automated hand watering
• Available with either small or large stands

ALL KITS CONTAIN:

• Control Unit – 1000L
• 16mm Fittings & Pipe
• 12x Large Stands
• Please Note Pots not included

STAND:

• Large Stand: From 16L up to 45L pots

Mail Order Delivery will take approximately 4/5 days

Stock available in store but maybe ordered in with in 24hrs due to demand

The post 12 Pot Run to Waste set up Auto drain Large Stands appeared first on Kitbag Shop.

A Great system for bumper yields, made simple.

DEEP WATER CULTURE SYSTEMS ARE A METHOD OF GROWING WHERE THE ROOTS ARE CONSTANTLY SUBMERGED IN HIGHLY OXYGENATED WATER. THERE’S NO TIMER TO MANAGE AND YOU’RE NEVER AT RISK OF WATER LOGGING OR THE PLANTS DRYING OUT. THE AIR PUMP CONSTANTLY OXYGENATES THE SOLUTION, MEANING THE ROOTS HAVE 24/7 ACCESS TO SUPER-OXYGENATED WATER AND NUTRIENTS.

There’s no separate water butt, meaning you can make the most of your floor space. There’s also no risk of contamination through the sharing of nutrient solution.
Oxypot DWC Systems are very simple to use – just keep the root tank topped-up with the nutrient solution. This enables the roots to draw food and oxygen from the highly aerated solution.

BENEFITS OF THE SYSTEM

Minimal growing media required – House & Garden clay pebbles are recommended.

Versatile –  these systems give you flexibility to suit any growing space.

Speed – DWC is one of the fastest growing techniques for heavy yields, because DWC enables optimum root access to water, nutrients and air.

GROWERS TIPS

Use the mesh pots for propagating – Once root growth is sufficient and the plant has hardened off, you can then transplant straight into the Oxypot.

Reversible lid – Allows younger plants better access to nutrient solution. Use the reversible lid to lower plants with smaller roots deeper into the nutrient solution, then as the roots grow out of the mesh pot the lid can be reversed.

The post Oxy Pot XL Hydroponic System Bubbler 6 Pots appeared first on Kitbag Shop.

This aero prop is amazing, so simple to use so easy to set up in minutes, complete with pump.

How it works
The X-Stream Aeroponic misting chamber provides plants with constant access to highly oxygenated water causing roots to grow faster and stronger. It also reduces the risk of drying out or root rot.

Root growth can be checked without disturbing the plants by lifting the plant tray. Temperature and humidity can be controlled via large vents in the lid.

We recommend using a Lummi Blade or CFL lamp just over the top of it

Once transplanted into your chosen media, you will need to complete the propagation period in your choice of follow-on propagator.

Benefits of the system

• The fastest root development possible – allows growers to start their crop earlier.
• Reduced risk of transplant shock – cuttings have stronger, thicker roots and the lack of growing media means less risk of pests and disease.
• Adjustable – control heat and humidity to suit the required growing environment.
• Practical – check progress without disturbing plants; easy access to pump and nutrient solution.
• Flexible – suitable for planting into any growing media or growing system.

All complete kits include:

• Vented lid
• Propagator (tank, tray(s), lid)
• Kitbag contains; pump, delivery system, neoprene clone collars and mesh pots

GROWERS TIPS

Leave on 24/7
When cuttings go into the system, fill the tank with water and leave the pump on 24/7.

Open the vents gradually
When roots begin to show open the vents slightly, increase the opening every day and then remove the lid completely to harden off for a couple of days before transplanting on.

Add Roots Hornet Super Roots for explosive roots
When roots begin to show add Hornet Super Roots at a quarter recommended dosage.

They’re ready to plant into your chosen media when roots begin to poke through the mesh pot
At this stage it’s important to move cuttings to an alternative propagator for hardening off before moving to a system or pot.

Keep your water at an optimum temperature
Propagation water should be between 22°C–26°C. We recommend an optional water a water heater if used in a colder garage or shed to maintain this.

The post X-Stream Aeroponic Propagators 40 Cuttings Clones appeared first on Kitbag Shop.

4 Pot Run to Waste set up Auto drain Large Stands

HEALTHY, HIGH-YIELD HAND WATERING

Ideal for optimising at home growing.

AN INTRODUCTION

Autodrain is the perfect system if you like to hand water but want to move away from plants been sat in water, and you’re looking to invest in your first system. When using the Autodrain System you can easily pump your run-off to waste. By not leaving your plants sat in nutrient, it forces your roots to search for water. This in turn rapidly increases your root zone. In addition, the nutrient can be checked for EC and pH to fine tune your feeding.

The flexibility of this modular system means the Control Unit can gather run-off from as many plants as required, which can then run to waste. This method also provides the opportunity to monitor the pH and EC of your run-off, and ensure plants are receiving the optimum amount of nutrient.

HOW DOES IT WORK?

Autodrain removes run-off fast which prevents root rot, increases nutrient uptake and growth, and reduces the risk of crop-destroying issues like Pythium.

The Autodrain Control Unit collects the run-off. When the run-off reaches the lower float in the Control Unit, the solution is pumped to waste.

WHY USE AUTODRAIN?

PREVENTS OVER WATERING

Over watering can lead to root diseases and reduced oxygen availability for the root zone. Autodrain Systems prevent over watering by automatically draining excess water from the growing medium.

MONITORING EFFICIENT NUTRIENT DELIVERY

Autodrain Systems allow users to monitor the amount of run-off and the EC and pH levels to ensure optimal nutrient update.

OXYGENATION OF ROOTS

Autodrain Systems help oxygenate the root zone. Draining away excess water creates air pockets around the roots, preventing suffocation and promoting healthy root development.

TIME SAVING

Automating the drainage process reduces the need for manual intervention, saving time and labour for growers. This is particularly important in larger indoor growing operations where managing each plant individually is impractical.

CONSISTENCY

Autodrain Systems help ensure consistent growing conditions for all plants.

SCALABILITY

Autodrain Systems can easily be scaled to accommodate different size growing operations.

ABOUT THIS SYSTEM

The IWS Autodrain Standard is ideal for growers with under 8 pots, looking to add some automation to their grow room. Autodrain Standard comes with 16mm pipe and fittings.

WHY CHOOSE THIS ONE?

• Ability to monitor the EC and pH of run-off
• Prevents water logging of root zone
• Automated hand watering
• Available with either small or large stands

ALL KITS CONTAIN:

• Control Unit – 1000L
• 16mm Fittings & Pipe
• 4x Large Stands

STAND:

• Large Stand: From 16L up to 45L pots

Please Note = Does Not Come With Fabric Pots

Mail Order Delivery will take approximately 4/5 days

Stock available in store but maybe ordered in with in 24hrs due to demand

The post 4 Pot Run to Waste set up Auto drain Large Stands appeared first on Kitbag Shop.

Consistent, precise feeding

This sale is for the 12 Pot PRO system with Large Trays and 25mm Pipe = its the most popular

With this kind or system you will have maximum control over feeding giving you an amazing yield with very little work each week.

An introduction

The IWS Dripper System is the ultimate growing system if you’re wanting to fine tune every element of the grow. From the amount of nutrient each plant receives to monitoring the pH and EC of run-off, IWS Dripper is for growers who want to be hands on but automate feeding.

The IWS Dripper System utilises the 4 litre per hour pressure compensated drippers or the blue flood drippers. This provides controllable, finely tuned feeding to the plants roots zone.

How does it work?

Nutrient is pumped from the FlexiTank down the dripper pipe to manifolds where the dripper lines are connected. It then runs directly to your plants, providing nutrient directly to the plant root zone. The 25mm dripper pipe is reduced to 3.2mm drippers where It pressurises, giving equal amounts of nutrient solution to each plant.

IWS Dripper is compatible with any pot type. These are placed on top of the stands which gather run-off. The Control Unit then collects and holds the run-off until it reaches the bottom float in the Control Unit, and it’s pumped to waste.

Why use Dripper?

Water efficiency

Dripper Systems deliver nutrient solution directly to the root zone, minimising water wastage through evaporation or run-off.

Precision

Dripper Systems give precise control over the amount of nutrient solution to each plant. This ensures plants receive the optimal amount of nutrient and reduces the risk of over or under watering. Additionally, Dripper Systems allow monitoring of both the nutrient and the run-off so you can maximise nutrient uptake.

Automated operation

The IWS Dripper System can be easily automated with the addition of a timer, allowing for consistent and regular watering schedules.

Uniform distribution

Dripper Systems provide uniform nutrient distribution across the entire growing area. Each plant receives an equal and consistent amount of nutrient, promoting uniform growth and reducing the risk of uneven crop development.

Reduced root diseases

By delivering nutrient solution directly to the root zone and avoiding over saturation, Dripper Systems help reduce the risk of root diseases caused by prolonged media saturation.

Scalability

Dripper Systems are scalable and can be adapted to suit the size of the grow room.

About this system

If you require a larger volume of run-off to be pumped from your plants or you’re using over 24 pots, IWS Dripper Pro is the ideal Dripper System for you.

With 25mm fittings, this system provides faster draining than the IWS Dripper Standard.

Why choose this one?

• Ensures even distribution of nutrient solution
• Ability to monitor nutrient and run-off
• Prevents water logging of root zone
• Available with either small or large stands
• Faster draining than the Dripper Standard

All sizes available from 4 – 48 pots Delivery to store with in 48hrs

All kits contain:

• Control Unit – 3000L
• 25mm Fittings & Pipe
• Large Stands
• Dripper Line & Manifold
• Filter
• 250L FlexiTank
• Flood Drippers
• Pressure Drippers

12x Large Stand: Up to 45L pots

PLEASE NOTE : Cloth Pots are sold separately.

Mail order delivery will take approximately 4/5 days

Stocks are available in store but are limited can be ordered in within 24hrs

The post IWS Dripper System = Pro With Large Stands 12 Pot appeared first on Kitbag Shop.

Consistent, precise feeding

This sale is for the 8 Pot PRO system with Large Trays and 25mm Pipe = its the most popular

With this kind or system you will have maximum control over feeding giving you an amazing yield with very little work each week.

An introduction

The IWS Dripper System is the ultimate growing system if you’re wanting to fine tune every element of the grow. From the amount of nutrient each plant receives to monitoring the pH and EC of run-off, IWS Dripper is for growers who want to be hands on but automate feeding.

The IWS Dripper System utilises the 4 litre per hour pressure compensated drippers or the blue flood drippers. This provides controllable, finely tuned feeding to the plants roots zone.

How does it work?

Nutrient is pumped from the FlexiTank down the dripper pipe to manifolds where the dripper lines are connected. It then runs directly to your plants, providing nutrient directly to the plant root zone. The 25mm dripper pipe is reduced to 3.2mm drippers where It pressurises, giving equal amounts of nutrient solution to each plant.

IWS Dripper is compatible with any pot type. These are placed on top of the stands which gather run-off. The Control Unit then collects and holds the run-off until it reaches the bottom float in the Control Unit, and it’s pumped to waste.

Why use Dripper?

Water efficiency

Dripper Systems deliver nutrient solution directly to the root zone, minimising water wastage through evaporation or run-off.

Precision

Dripper Systems give precise control over the amount of nutrient solution to each plant. This ensures plants receive the optimal amount of nutrient and reduces the risk of over or under watering. Additionally, Dripper Systems allow monitoring of both the nutrient and the run-off so you can maximise nutrient uptake.

Automated operation

The IWS Dripper System can be easily automated with the addition of a timer, allowing for consistent and regular watering schedules.

Uniform distribution

Dripper Systems provide uniform nutrient distribution across the entire growing area. Each plant receives an equal and consistent amount of nutrient, promoting uniform growth and reducing the risk of uneven crop development.

Reduced root diseases

By delivering nutrient solution directly to the root zone and avoiding over saturation, Dripper Systems help reduce the risk of root diseases caused by prolonged media saturation.

Scalability

Dripper Systems are scalable and can be adapted to suit the size of the grow room.

About this system

If you require a larger volume of run-off to be pumped from your plants or you’re using over 24 pots, IWS Dripper Pro is the ideal Dripper System for you.

With 25mm fittings, this system provides faster draining than the IWS Dripper Standard.

Why choose this one?

• Ensures even distribution of nutrient solution
• Ability to monitor nutrient and run-off
• Prevents water logging of root zone
• Available with either small or large stands
• Faster draining than the Dripper Standard

All sizes available from 4 – 48 pots Delivery to store with in 48hrs

All kits contain:

• Control Unit – 3000L
• 25mm Fittings & Pipe
• Large Stands
• Dripper Line & Manifold
• Filter
• 250L FlexiTank
• Flood Drippers
• Pressure Drippers

8x Large Stand: Up to 45L pots

PLEASE NOTE : Cloth Pots are sold separately.

Mail order delivery will take approximately 4/5 days

Stocks are available in store but are limited can be ordered in within 24hrs

The post IWS Dripper System = Pro With Large Stands 8 Pot appeared first on Kitbag Shop.